102kW 127kVA Weichai Baudouin Industrial Generator Set WP4.1D113E200
Power: 102kW / 127kVA
Engine: WP4.1D113E200
Frequency: 50Hz
View Specs
| Item | Specification |
|---|---|
| Genset model | WB90D5 |
| Prime power | 112.5kVA / 90kW |
| Standby power | 123.8kVA / 99kW |
| CSV matched rating | Prime Power, 112.5kVA / 90kW |
| Rated voltage | 400/230V, configurable within 380-440V project requirements |
| Frequency | 50Hz |
| Rated speed | 1500rpm |
| Phase | 3 phase, 4 wire |
| Power factor | 0.8 lagging |
| Duty | Prime power |
| Application | Industrial generator set |
| Engine brand | Weichai Baudouin |
| Catalogue series | RUI POWER |
| Engine model | WP4.6ND138E310 |
| Emission stage | China 3* |
| Fuel type | Diesel |
| Controller model | DSE7320 MKII recommended |
| Fuel consumption at full prime load | About 22.5 L/h |
| Specific fuel consumption | 205-215 g/kWh rated-load class |
| Calculated full-prime fuel rate | About 0.25 L/kWh at 90kW |
| Open dimensions | 2100 x 850 x 1450 mm |
| Open weight | 1100 kg |
| Silent enclosure type | Acoustic canopy, industrial weather-protected type |
| Silent dimensions | 2800 x 1100 x 1700 mm |
| Silent weight | 1600 kg |
| Silent noise level | 75-85 dB(A) at 7m typical for this acoustic enclosure class |
| Item | Specification |
|---|---|
| Engine brand | Weichai Baudouin |
| Engine model | WP4.6ND138E310 |
| Catalogue series | RUI POWER |
| Engine type | 4-cycle inline 4-cylinder diesel engine |
| Cylinders | 4L |
| Displacement | 4.6 L |
| Bore x stroke | 108 mm x 125 mm |
| Rated speed | 1500rpm |
| Aspiration | Turbocharged and aftercooled |
| Fuel system | Electronic controlled direct injection diesel fuel system |
| Cooling system | Water cooled, set-mounted radiator arrangement |
| Governor | Electronic speed control |
| Starting system | 24V DC electric start |
| Fuel consumption | About 22.5 L/h at full prime load |
| Item | Specification |
|---|---|
| Alternator brand | Stamford / Leroy Somer equivalent |
| Alternator model | UCI274C / 112.5kVA class brushless low-voltage alternator |
| Output rating | Matched for 112.5kVA / 90kW prime and 123.8kVA / 99kW standby |
| Rated voltage | 400/230V, configurable within 380-440V project requirements |
| Voltage range | 380-440V |
| Frequency | 50Hz |
| Phase | 3 phase, 4 wire |
| Connection | Wye, 3-phase |
| Power factor | 0.8 lagging |
| Insulation class | Class H |
| Protection class | IP23 |
| AVR | Automatic voltage regulator |
| Excitation system | Brushless, self-excited or PMG-supported according to project configuration |
| Bearing type | Single bearing |
| Voltage regulation | +/- 1.0% typical |
Confirm the required duty, electrical supply, installation interfaces and scope of supply when requesting this product. Unknown requirements can be discussed in the inquiry.
Interested in this model?
WB90D5